Philippines- Commercial building
This prefabricated steel commercial building was completed in the Philippines in 2022. The building measures 36 m × 18 m × 3 m, engineered to withstand wind speeds up to 160 km/h.
The primary frame adopts hot-dip galvanized steel tube columns and beams, forming a rigid, corrosion-resistant skeleton for commercial occupancy. Hot-dip galvanizing on all steel members protects the structure against the humid tropical climate. C purlins act as secondary members, supporting the roof and wall cladding and transferring loads to the main steel frame.
For the envelope, the roof is covered with PPGI single corrugated sheets combined with fiber glass wool roll insulation held in place by mesh wire, reducing solar heat gain. The walls use V950 50 mm EPS sandwich panels for thermal and sound insulation, and a V850 0.37 mm PPGI single-sheet ceiling forms the inner ceiling. A 1 mm 304 stainless steel gutter ensures durable rainwater drainage, while a roller-up door provides vehicle and goods access.
All steel components were shop-fabricated and shipped in 3 × 40HQ containers for fast on-site assembly. The compact, clear-span layout makes this an economical and durable solution for commercial retail and light trade use in the Philippines.
|
Philippines- Commercial building |
|||||
|
Country |
Philippines |
Year |
2022 |
||
|
Project Information |
|||||
|
Project |
Commercial Building |
Dimension |
36mx18mx3m |
Wind speed |
160km/h |
|
Material |
Hot galvanized steel tube |
Paint |
Hot galvanized |
Purline |
C purline |
|
Roofing |
PPGI single corrugated sheet +Fiber glass wool roll with mesh wire |
Wall |
V950 50mm EPS sandwich panelV950 50mm EPS |
Ceiling |
V850 0.37mm PPGI single sheet ceilingV850 0.37mm |
|
Gutter |
1mm 304 stainless gutter |
Door |
Roller-up door |
Containers |
3x40HQ |
|
Project Display |
|||||


