A qualified procedure is not enough - the person holding the torch must also be qualified for the work. Welder qualification and weld classes tell you who is allowed to weld what, and how good the result must be.
1. Welder qualification
Each welder is tested on a specific combination: process, position, joint type, material and thickness. Passing the test certifies that welder for that range. Outside the range, the welder must be re-tested.
2. Why positions matter
Welding flat is easier than welding vertical or overhead. A welder qualified only in flat position cannot be assumed competent overhead. Structural frames involve vertical and overhead joints, so qualification must cover the positions used.
3. Weld classes and acceptance levels
Weld quality is graded by acceptance criteria - how much porosity, undercut, slag or lack of fusion is permitted. Higher classes demand tighter limits and more inspection. The class should be specified for each joint, according to its duty: a fatigue-loaded crane bracket deserves a stricter class than a secondary tie.
4. Visual and internal inspection
Visual inspection catches surface defects; ultrasonic or radiographic testing finds internal ones. The specified class determines what inspection is required and how much of the weld is tested.
5. Records
Welder certificates with their qualified ranges.
Weld maps showing which welder made which joint.
Inspection reports with acceptance results.
Repair records, where defects were corrected.
6. What to ask
Are welders qualified for the positions and thicknesses used?
What weld class applies to each joint type?
What inspection proportion is specified?
Can I see certificates and inspection reports?
How are repairs recorded and re-inspected?
In short: qualified procedures need qualified welders, and both need a defined acceptance class. Ask for certificates, weld maps and inspection records - that is how you know the joints are as good as the drawings require.
Contact us and send us your requirements - we will get back to you as soon as possible with a quotation.

