Where Corrosion Starts Connections, Cut Edges And Standing Water

Nov 06, 2026

Leave a message

Steel buildings rarely fail because the main panels rust through. They fail first at the small places: bolted joints, cut edges, and spots where water sits. Knowing those places tells you where to spend your protection budget.

1. Connections are the weak point

Every bolted joint is a gap. Water enters between the plates, sits there, and corrodes from the inside, where you cannot see it or paint it. Once corrosion starts in a joint, it is very hard to stop.

2. Cut edges lose their protection

Coated sheet and galvanized members are protected on the surface, but a cut edge exposes bare steel. On thin sheet, the exposed edge is small; on thick galvanized members, cut edges and weld zones can be the first to rust. Design should minimize field cuts and require edge protection where cuts are unavoidable.

3. Water finds the low points

Gutters and outlets that silt up.

Joints between panels and flashings.

Base details where water ponds against the column.

Penetrations and openings with poor upstands.

Low spots on low-slope roofs.

4. Hidden voids

Hollow sections, wall cavities and the space behind linings can collect moisture and stay wet for years. Seal hollow sections, ventilate or drain cavities, and avoid designing enclosed voids that no one can inspect.

5. Where maintenance cannot reach

The most expensive corrosion is in places nobody can inspect: behind cladding, inside joints, under insulation. Design for access, and schedule inspections of the places you cannot see.

6. What to specify

Protection of cut edges and weld zones.

Sealed or drained joints at connections.

Drainage that prevents standing water at bases and gutters.

Inspection access to hidden areas.

A maintenance schedule that checks joints, not just visible panels.

In short: corrosion starts at joints, cut edges, low points and hidden voids - not on the big visible surfaces. Protect those places, drain the water, and inspect what you cannot see, and the building will last.

Contact us and send us your requirements - we will get back to you as soon as possible with a quotation.