Bolted Connections: The Detail That Makes Steel Reusable

Nov 02, 2026

Leave a message

Steel is recycled because it can be melted - but it is reused because it can be taken apart. Whether a building can be dismantled and its members used again depends largely on how the members are joined.

1. Welded versus bolted

A welded frame is, in effect, one continuous piece of steel. To dismantle it, you must cut through the welds, which damages the member and costs labour. A bolted frame can be unbolted member by member, leaving the steel intact and re-usable.

2. What that means at end of life

Bolted members can be sold as sections, not only as scrap.

Dismantling is faster and needs less specialized cutting.

Members keep their length, coating and section properties.

The buyer of a used building gets a documented, re-usable kit.

3. Where bolts already dominate

Portal frames, purlins, bracing, cladding and mezzanine systems are largely bolted already. The main exceptions are shop-welded connections - column-to-base, end plates, crane brackets - which are made in the factory and then bolted on site. That combination is what makes portal frames both strong and dismantlable.

4. Design choices that help

Standard bolt holes and consistent bolt grades.

Connections that do not rely on site welding.

Member lengths that suit transport and re-use.

Documented connection details so a future owner can reassemble.

5. The limit of the argument

Not every connection can be bolted; some joints need welding for strength or stiffness. The practical aim is not "all bolted" but "bolted where it counts" - so the frame can be taken down without destroying its parts.

6. What to ask

Which connections are welded in the factory and which are bolted on site?

Can the frame be dismantled without cutting structural members?

Will the connection drawings be handed over at completion?

In short: bolted connections turn a steel building into a kit that can be taken apart and used again, while welded joints turn it into scrap. Ask which is which - it decides the building's value at the end of its life.

Contact us and send us your requirements - we will get back to you as soon as possible with a quotation.