On a snowy steel roof, two dangers lurk: snow and ice sliding off the roof in slabs, and people working on the roof. Snow guards and fall-protection systems turn a dangerous roof into a safe one. This article explains how they work and what to specify.
1. The sliding snow problem
On smooth metal roofs, snow melts at the roof surface, forms a slippery layer, and the whole snow slab can slide off at once - injuring people, damaging equipment, and blocking doors and gutters below. The problem is worst on long, low-slope, warm-roof buildings.
2. Snow guards: holding the snow
Snow guards are small barriers or brackets installed across the roof that hold the snow in place so it melts gradually instead of sliding. Types include:
Pad-style guards: discrete brackets in rows.
Pipe guards: a pipe held above the roof by brackets - good for large roofs.
Fence guards: continuous barriers near eaves and above entrances.
3. Where snow guards must go
Above entrances, walkways and equipment.
Along the eave line and above gutters.
At valley and roof-step locations.
Distributed across large roofs to prevent concentrated slides.
4. Roof access safety
Roofs also need fall protection for maintenance workers:
Fixed ladders with safety cages or rail systems.
Roof walkways and guardrails near edges.
Anchor points for safety harnesses.
Permanent access hatches with proper protection.
5. Design and specification notes
| Point | Why it matters |
|---|---|
| Snow load data | Determines the size and spacing of guards |
| Roof cladding type | Guards must suit standing seam or corrugated profiles |
| Fastener sealing | Every guard penetration must be sealed against leaks |
| Wind and ice loads | Guards themselves are loaded - engineer them properly |
In short: snow guards and fall-protection systems are essential safety hardware for steel roofs in snow regions. Specify them from the design stage, positioned for the roof's geometry and the snow loads - protecting people and property below is far cheaper than repairing the consequences.
Contact us and send us your requirements - we will get back to you as soon as possible with a quotation.

